The patented air-quality technology, engineered in Ontario.
ECOairflow Inc. has spent the better part of three decades doing one thing, making electronic air cleaners that out-perform pleated and HEPA filters at a fraction of the static pressure drop. Every unit is designed and assembled in Oshawa, Ontario, and shipped from there across North America and beyond.
Built in Oshawa, Ontario
Aluminum frames are cut, squared and assembled in small batches, then paired with the glass-fibre media pad before crating.
Reserved for further technical or descriptive imagery.
Air that's measurably cleaner, without measuring an HVAC bill twice.
The HVAC industry's answer to indoor air quality has been "tighter pleats." Tighter pleats mean higher pressure drop, harder-working blowers, shorter HVAC life, and more frequent filter changes. We took a different route: a sealed 24V polarising field, a one-piece glass-fibre pad, and an honest pressure-drop curve.
The result is a filter that captures bacteria, viruses, smoke, dander, pollen and radon-decay particles, down to .001 microns, while running at the operating cost of a basic filter.
- No ozone (UL2998 certified, the strictest threshold available)
- No frequent change-outs, one-piece pads, recyclable
- No HVAC penalty, typical 15% energy reduction vs comparable pleated
Electronic Polarization Filtration (EPF), explained.
A floating 18–30V field is generated by a hermetically sealed power module inside the filter cabinet. The field polarises every particle drawn through the inlet, even sub-micron ones, and a low-density glass-fibre pad downstream traps them by static attraction, not by mechanical sieving.
That's the magic: filtration happens by polarisation, so the pad can stay loose. Loose pad = low pressure drop. Polarising field = filtration finer than HEPA. The two never had to fight each other; they just had to be combined correctly.
- Sealed 24V floating module
- 1.75 VA · 2W consumption
- No corona, no ionisation, no ozone
- Tandem-linkable for larger banks
- Independent radon-RDP testing
- Patented one-piece pad geometry
Tested by third parties. Compliant where it matters.
Every ECOairflow filter ships with documented compliance against the standards the HVAC, healthcare and green-building communities actually specify.
ETL Listed & UL2998 Zero Ozone
Independent ETL testing certifies every unit against UL2998, which caps ozone emission at .0005 ppm, the strictest indoor-air ozone standard.
Why this matters in healthcareMERV 13–16 (ASHRAE 52.2)
Lab-certified MERV ratings using ASHRAE-certified test dust with a true carbon component, the only honest way to claim a MERV number.
Commercial MERV optionsLEED, WELL, ILFI, Passivehaus
ECOairflow filters can earn credits under the major green-building rating systems, including USGBC LEED and the International WELL Building Standard.
Green-building usesRadon RDP Capability
Third-party tested by certified radon professionals for the capture of radon decay particles, down to .001 microns and below.
Dynamo radon performanceAppendix J (M-Series)
The M-Series™ Hybrid 2″ is the only ECOairflow product line specified for medical treatment rooms, performance is assured power-on, power-off, and under the Appendix J protocol.
M-Series specsNational Green Building Standard
Filters contribute to NGBS credit categories for indoor air quality and energy efficiency in new and renovated residential construction.
Residential applications
From Oshawa, Ontario, across three continents.
ECOairflow is engineered, assembled and tested at our Oshawa, Ontario facility. Distribution covers Canada and the United States directly, with active distribution partners across Mexico, the Middle East and South America.
- Direct shipping: Canada, United States, Mexico
- International distribution: Middle East, South America
- OEM & private-label programs for cabinet builders
- Custom sizes on request, any standard or non-standard cabinet
Have a cabinet to spec or a certification target to hit?
Tell us about the application, face velocity, MERV target, ozone limit, cabinet footprint, and an ECOairflow engineer will come back with a specific product and configuration.